Question 1

How do you decide between selective, push back, and drive-in racking for a Denver warehouse?

Accepted Answer

It comes down to your SKU count, pallet volume per SKU, and how often each SKU turns. Selective racking gives full pallet access for wide SKU ranges, push back adds two to six deep positions with good selectivity, and drive-in wins when you have few SKUs and high pallet counts. During a free design consultation we model your pallet profile and show the usable positions each option adds in your building.

Question 2

What does your free warehouse design consultation actually include?

Accepted Answer

We review your building dimensions, clear height, column grid, aisle requirements, and pallet data, then produce a CAD layout with rack elevations and total pallet positions. You get side-by-side layout options, a firm quote, and an install timeline at no cost. Most Denver metro operators use it as a planning document even before they buy.

Question 3

How much extra storage can I realistically gain in my existing building?

Accepted Answer

Most facilities we look at in the Denver area are storing well below their vertical potential. Adding beam levels, tightening aisles, or converting a portion of selective racking to deeper storage often gains 20-40% more pallet positions without adding square footage. We quantify the gain in the layout so you can compare it to the cost of leasing more space.

Question 4

Can you reconfigure or expand the racking we already own?

Accepted Answer

Yes. We regularly add levels, reconfigure bays, and tie new racking into existing systems. We verify upright capacity, beam sizes, and connector compatibility first so the expanded system is loaded correctly. If a section is not worth keeping, we will tell you straight rather than build around it.

Question 5

What load capacity information do you provide for a new system?

Accepted Answer

Every system comes with beam and upright capacity ratings tied to your configured beam levels and pallet weights. We size components around your heaviest realistic pallet, not an average, and we provide load rating information for posting at the racking. If your pallet weights change later, contact us and we will confirm what the current configuration supports.

Question 6

How long does a typical pallet rack project take from quote to install?

Accepted Answer

A layout and firm quote usually comes back within one business day. Standard selective racking is often on site within one to two weeks, while deeper storage systems and specialty configurations run three to six weeks depending on the manufacturer. We give you a realistic date up front and keep you updated if anything shifts.

Question 7

Do you handle installation, or do we need our own labor?

Accepted Answer

Installation is included in our scope. Racking is anchored, plumbed, and leveled to the approved layout, and we confirm aisle dimensions on site before final anchoring. You get one point of contact from layout through the final walk of the installed system.

Question 8

How do you keep installation from shutting down our operation?

Accepted Answer

We phase the work around your shipping schedule. That can mean installing in sections, working nights or weekends, or staging material so only one zone is out of service at a time. Being local to the Denver metro means we can adjust the schedule quickly when your volume changes mid-project.

Question 9

What makes working with a local Denver team different?

Accepted Answer

We know the local industrial building stock, from the older warehouses along the I-70 corridor to newer distribution space in Aurora and Commerce City, so layouts account for real column grids and clear heights. When something needs attention, you reach a person who has seen your building rather than a call center. We follow up after installation to make sure the system is working the way it was designed.

Question 10

Can you help plan racking for a building we have not leased yet?

Accepted Answer

Yes, and it is one of the more useful things we do. Send us the drawings or specs for the buildings you are considering and we will lay out racking in each one so you can compare pallet positions per dollar of rent. Several Denver-area companies have changed which building they signed after seeing the layouts.

Question 11

What information should I have ready before requesting a quote?

Accepted Answer

Building dimensions and clear height, pallet dimensions and weights, SKU count, and how many pallets you need to store are enough to get started. A floor plan or lease drawing speeds things up. If you do not have all of it, we can work from what you have and fill in the rest.

Question 12

Do you sell used pallet racking?

Accepted Answer

We supply new systems only, so capacities, specifications, and warranty coverage are documented. New components also keep future expansion simple because the profiles still match years later. If budget is the driver, we will show where a different configuration saves money instead.

Industrial Pallet Racks & Warehouse Racking Solutions in Denver, CO

Pallet Rack Systems for Every Warehouse Need

Selective Pallet Rack

Push Back Pallet Rack

Drive-In Pallet Rack

Pallet Flow Rack

Cantilever Rack

Carton Flow Rack

Complete Warehouse Storage Solutions

Free Warehouse Design

Space Optimization

Fast Delivery

Professional Installation

Exceptional Service

Recent Pallet Rack Projects

Common Warehouse Design Questions

Free Design Consultation Includes:

Ready to Optimize Your Warehouse?

Serving the Denver Metro Area

Pallet Racks & Warehouse Racking FAQs

Visit Our Denver Location

Denver Pallet Racks

Address

Phone

Business Hours

Start Your Denver Warehouse Project Today